Ningbo Beilun Jiawei Machinery Co., Ltd.
Ningbo Beilun Jiawei Machinery Co.,Ltd One-Stop Aluminum Die Casting Solutions
Add to Cart
Aluminum Die Casting Application and 160T - 3000T Dimensions Shot Sleeve
Product Description
| Material | H13,1.2344,SKD61,Others |
| Surface Finish | Rough Peeled |
| Material Conditions | Annealed |
| Hardness | 47~49HRC,477~475HB |
| Lifetime | Over than 1year as per your requirement |
| Surface Treatment | Gas Nitridation 0.2mm |
| Material Shaped | Forging |
| The main components of the shot system | 1.The cold chamber or shot sleeve 2.The plunger tip or shot tip 3.The shot cylinder 4.The plunger rod |
Material Datasheet for Aluminum Die casting Application Shot Sleeve
H13 used to fabricate shot sleeves has to be heat treated to provide a suitable combination of toghness, and resistance to thermal fatigue, erosion and wear.
| Country | USA | German | Japan |
| Standard | ASTM A681 | DIN EN ISO 4957 | JIS G4404 |
| Grades | H13 | 1.2344/X40CrMoV5-1 | SKD61 |
| ASTM A681 | C | Mn | P | S | Si | Cr | V | Mo | ||||||
| H13 | 0.32 | 0.45 | 0.2 | 0.6 | 0.03 | 0.03 | 0.8 | 1.25 | 4.75 | 5.5 | 0.8 | 1.2 | 1.1 | 1.75 |
| DIN ISO 4957 | C | Mn | P | S | Si | Cr | V | Mo | ||||||
| 1.2344 /X40CrMoV5-1 | 0.35 | 0.42 | 0.25 | 0.5 | 0.03 | 0.02 | 0.8 | 1.2 | 4.8 | 5.5 | 0.85 | 1.15 | 1.1 | 1.5 |
| JIS G4404 | C | Mn | P | S | Si | Cr | V | Mo | ||||||
| SKD61 | 0.35 | 0.42 | 0.25 | 0.5 | 0.03 | 0.02 | 0.8 | 1.2 | 4.8 | 5.5 | 0.8 | 1.15 | 1 | 1.5 |
