Ningbo Beilun Jiawei Machinery Co., Ltd.
Ningbo Beilun Jiawei Machinery Co.,Ltd One-Stop Aluminum Die Casting Solutions
Add to Cart
Annealed Aluminum Pressure Die Casting HPDC Shot Sleeves With Cooling System
Product Description
This Pressure Die Casting HPDC Shot Sleeve is a key Element of the Aluminum Die Cast Process.
This HPDC Shot Sleeve can totally consider the failures of shot sleeves.
The Shot sleeves normally fail from one of the following five reasons:
| Material | H13,1.2344,SKD61,Others |
| Surface Finish | Rough Peeled |
| Material Conditions | Annealed |
| Hardness | 47~49HRC,477~475HB |
| Lifetime | Over than 1year as per your requirement |
| Surface Treatment | Gas Nitridation 0.2mm |
| Material Shaped | Forging |
| The main components of the shot system | 1.The cold chamber or shot sleeve 2.The plunger tip or shot tip 3.The shot cylinder 4.The plunger rod |
Material Datasheet for Pressure Die casting Shot Sleeve
H13 is a hot work chromium-molybdenum-vanadium tool steel. It has excellent working properties and offers
high temperature strength and wear resistance.
| Country | USA | German | Japan |
| Standard | ASTM A681 | DIN EN ISO 4957 | JIS G4404 |
| Grades | H13 | 1.2344/X40CrMoV5-1 | SKD61 |
| ASTM A681 | C | Mn | P | S | Si | Cr | V | Mo | ||||||
| H13 | 0.32 | 0.45 | 0.2 | 0.6 | 0.03 | 0.03 | 0.8 | 1.25 | 4.75 | 5.5 | 0.8 | 1.2 | 1.1 | 1.75 |
| DIN ISO 4957 | C | Mn | P | S | Si | Cr | V | Mo | ||||||
| 1.2344 /X40CrMoV5-1 | 0.35 | 0.42 | 0.25 | 0.5 | 0.03 | 0.02 | 0.8 | 1.2 | 4.8 | 5.5 | 0.85 | 1.15 | 1.1 | 1.5 |
| JIS G4404 | C | Mn | P | S | Si | Cr | V | Mo | ||||||
| SKD61 | 0.35 | 0.42 | 0.25 | 0.5 | 0.03 | 0.02 | 0.8 | 1.2 | 4.8 | 5.5 | 0.8 | 1.15 | 1 | 1.5 |